TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 710 of 750

TM 5-5420-228-24

GENERAL MAINTENANCE - Continued

Removal of Studs Broken Below Surface (Sheet 3 of 3)

10. Using hammer, drive fluted extractor (F) into

stud (D).

11. Manually start nut (J) counterclockwise

on extractor (F).

12. Using wrench, tighten nut (J) on extractor

(F) by turning counterclockwise.

13. Using wrench, keep turning nut (J) counter-

clockwise until stud (D) is removed from

threaded hole (G).

14. Using clean rag, wipe out threaded hole (G) and

surface (H).

End of Task

C-16

TA251286