TM 5-5420-228-24
GENERAL MAINTENANCE - Continued
Wheel Bearing Packer Lubrication of Bearings (Sheet 2 of 3)
6.
Screw cap (C) onto center post (D) to hold
bearing (E) in position.
7.
Using grease gun, pump grease into
fitting (G) until resistance is felt.
8.
Unscrew cap (C) from center post (D).
10. Remove bearing (F) from base (B).
Go on to Sheet 3
9.
Take insert (E) from base (B).
TA251295
C-25