TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 714 of 750

TM 5-5420-228-24

GENERAL MAINTENANCE - Continued

Dowel Pin Installation

TOOLS: Ball peen hammer

SUPPLIES:

Wooden block (make from Item 25,

Appendix D)

1.

Place pin (A) into hole (B), keeping pin (A) as

straight as possible.

CAUTION

If pin (A) is tapped too hard, end

will flatten out and pin (A) will

not properly seat.

2.

Using hammer, lightly tap in pin (A) until

seated.

3.

If pin (A) cannot be driven by lightly taping

with hammer, using wooden block (C), put

wooden block against pin (A) and hit with

hammer until pin (A) is seated.

End of Task

C-20

TA251290