TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 712 of 750

TM 5-5420-228-24

GENERAL MAINTENANCE - Continued

Installation of New Studs

TOOLS: Screw threading set

1.

Using tap (A), clean out threads in hole (B).

2.

Using two wrenches, screw together and jam

two nuts (C) onto end of new stud (D).

3.

Using socket, loosely install new stud (D) into hole (B).

End of Task

C-18

4.

Using torque wrench, tighten new stud (D) to

required value (refer to specific maintenance

procedure).

5.

Using two wrenches, remove two nuts (C)

from new stud (D).

TA251288