TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 711 of 750

GENERAL MAINTENANCE - Continued

Removal of Studs Broken Above Surface

TOOLS:

Ball peen hammer

Screw extractor set

Hand oiler

SUPPLIES:

Penetrating oil (Item 11, Appendix D)

Clean rags (Item 12, Appendix D)

1.

Using penetrating oil, lube threaded

area (A).

2.

3.

4.

TM 5-5420-228-24

Using hammer, lightly tap stud (B).

Using hammer, tap stud remover (C)

on stud (B).

Using wrench, turn stud remover (C)

counterclockwise.

5.

Using wrench, keep turning stud remover (C)

counterclockwise until stud (B) is removed

from threaded hole (D).

TA251287

C-17

6.

Using clean rag, wipe out threaded hole

(D) and surface (E).

End of Task