TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 317 of 549

TM 9-2320-209-10-1

FRAME 7

1.

WARNING

Do not overload winch or operate it with less than four

turns of cable on drum; either condition can damage

winch.

Do not allow personnel near calbe during winch operation.

If cable should snap or fray it can cause serious injury.

CAUTION

Do not force winch clutch lever (1) or the clutch and get

damaged.

Shift winch clutch lever (1) to on position, (toward left side of truck).

NOTE

If winch clutch lever (1) is hard to shift, with powertake

off shifting lever in on position, place transmission in gear

and slip engine clutch slightly.

GO TO FRAME 8

4-263