TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 320 of 549

TM 9-2320-209-10-1

1.

2.

3.

4.

5.

When all slack cable has been drawn in, lift load just off the ground.

Step on, and press clutch pedal all the way down to stop winch.

Safety brake should hold load.

CAUTION

Do not turn brake adjusting screw (1) out (to the left)

more than one full turn. Screw will come out of brake

drum and brake drum will have to be taken apart to fix.

If safety brake does not hold, working underneath truck, using wrench, turn

brake adjustment screw (1) right to tighten brake.

Do steps 1 through 3 again. If safety brake still does not hold, tell

organizational maintenance.

GO TO FRAME 11

4-266