TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

  TM-9-2320-209-10-1 - Page 448 of 549

TM 9-2320-209-10-1
FRAME 4
1.
To stop the engine heater, set the HI-LO switch (1) to LO position.
2.
Set START -OFF -RUN switch (2) to OFF position, burner will stop within a few
seconds.
3.
Indicator light (3) will remain on, blower will keep running until burner cools and
unburned gases are out.
NOTE
Always wait until indicator light (3) goes out before trying to
restart engine heater.
4.
If heater fails to start after three tries or stops after a short run, tell direct
support maintenance.
4-394


Back to Top