TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

  TM-9-2320-209-10-1 - Page 459 of 549

TM 9-2320-209-10-1
d.
Moving the Truck.
CAUTION
1.
2.
3.
4.
5.
6.
7.
After shutdown for long periods of time, lubricants harden
and brakes and tires may freeze fast. Take each condition
into account before moving truck so that equipment will not
be damaged.
NOTE
Check that PMCS that apply to operation in extreme cold
weather have been done.
Start engine. (Refer to para 4-6 b), and let it warm up thoroughly.
Step on clutch pedal (1) and press it all the way down.
Place FRONT TRANSMISSION gearshift lever (2) in position 1.
Place TRANSFER CASE gearshift lever (3) to LOW (DOWN) position.
Let clutch pedal (1) up.
Drive truck at lowest speed possible for about 100 yards. Be careful not to stall
engine.
This should heat gears and tires for normal operation.
Stop engine. (Refer to para 4-6e.)
4-405


Back to Top