TM 9-2320-209-10-1
b.
Arctic Winterization Kit Controls and Indicators.
1.
HI-LO switch. Controls the rate of
fuel burning and speed of blower in
personnel heater.
2.
Red indicator light. Is on when the
personnel heater is operating.
3.
START-OFF-RUN switch. Is set
to START position to start personnel
heater.
Set to RUN position to run
heater and to OFF to stop heater.
4.
Air control knob.
Is pulled all the
way out to get maximum air flow,
is pushed in to lower or shut off
air flow.
5.
DEFROSTER control knob. Is
pulled all the way out for maximum
defroster operation. Is pushed in
for maximum heater operation; is
placed half way out for combination
defroster heater operation.
6.
EMERGENCY switch. Is for emer-
gency conditions only. When switch
is placed in down position, fuel flow
to heater stops immediately and
blower motor is shut off.
7.
HI-LO switch. Controls rate of
fuel burning and speed of blower
in power plant (engine) heater.
8.
Red indicator light. Is on when
power plant heater is operating.
9.
START-OFF-RUN switch. Is set
to START position to start power
plant heater, to RUN position to
run heater and to OFF to stop
heater.
4-2 4