TM-9-2320-209-10-2
2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; SCHEDULED MAINTENANCE; OPERATOR LEVEL
SEPTEMBER 1980
TM-9-2320-209-10-2 - Page 57 of 69
TM9-2320-209-10-2/TO 36A12-1B-1091-2
Table 4-1. Operator/Crew Preventive Maintenance Checks and Services
for Special Purpose Kits - Cent
NOTE: These checks are to be made in the order listed, within designated interval.
B-Before operation
A-After operation M-Monthly
D-During operation
W-Weekly
Interval
Item
Item to be Inspected
Equipment is
No.
Procedure: Check for and have repaired, filled,
not ready/
B D
A
w
M
or
adjusted as needed
available if:
3
A-FRAME KIT
●
a.
Before operating A-frame (1) , make
sure it is positioned at about a 60° angle and
is securely attached to the front bumper ancl
the inverted pintle hook (2) . Also check
that:
●
Cable clamps (3) are not loose
Cable is frayed
●
Cable assembly (4) is not frayed
or broken.
or broken
TA 045372
WARNING
Use leather gloves when checking
winch cable. Injury to hands may
result if gloves are not worn.
●
b. Inspect A-frame ( 1)
for bends and winch
cable (5) for kinks, frays, and breaks.
Chanae 1
4-7 /(4-8
hlankl
Back to Top
