TM-9-2320-209-10-4
2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; OPERATOR LEVEL
SEPTEMBER 1980
TM-9-2320-209-10-4 - Page 28 of 87
TM 9-2320-209-10-4
2-6.
SPARE WHEEL REMOVAL AND REPLACEMENT.
TOOLS :
Wheel stud nut wrench
1 l/2-inch wrench
13/16-inch wrench
SUPPLIES :
None
PERSONNEL: Two
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a .
Removal.
(1) All trucks except M342A2, M275A1, and M275A2.
FRAME 1
1.
Using wheel stud nut wrench, loosen two nuts (1).
2.
Turn spare wheel (2) about 1 inch to left to aline nuts (1) with hole in
bracket (3).
3.
Using wheel stud nut wrench, turn shaft (4) to right slightly.
4.
Lift up pawl (5).
5.
Using wheel stud nut wrench, turn shaft (4) to left until spare wheel (2) is
on ground.
GO TO FRAME 2
2-16
Back to Top
