TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

  TM-9-2320-209-20-3-1 - Page 110 of 830

TM 9-2320-209-20-3-1
(f) Elbow
CAUTION
Fittings are made of soft brass. They can be stripped
very easily if overtightened. Tighten fittings only
enough to stop fuel leaking.
NOTE
Elbow at primary fuel filter on trucks with LD-465
engine is used for this typical procedure.
FRAME 1
1.
Using 7/8-inch open end wrench, hold bushing (l). Using 10-inch pipe wrench,
screw in and tighten elbow (2).
2.
Using 3/4-inch combination box and open end box wrench, screw on and tighten tube
nut (3).
1.
2.
3.
NOTE
Follow -on Maintenance Action Required:
Start engine.
Refer to TM 9-2320-209-10.
Check that fuel lines and fittings have no leaks.
Stop engine.
Refer to TM 9-2320-209-10.
END OF TASK
4-28


Back to Top