TM-9-2320-209-20-3-1
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4
MAY 1981
TM-9-2320-209-20-3-1 - Page 162 of 830
TM 9-2320-209-20-3-1
c. Replacement.
1.
2.
3.
4.
5.
Slide two clamps (1) on ignition unit (2).
Put ignition unit (2) with two clamps (1) in place and aline screw holes.
Using 1/2-inch wrench, screw on and tighten two screws with washers ( 3).
Using pliers, screw on and tighten electrical cable connector (4) to
ignition unit (2).
Using 7/8-inch wrench, screw on and tighten electrical cable connector (5) to
ignition unit ( 2).
NOTE
Follow-on Maintenance Action Required:
1.
Close hood. Refer to TM 9-2320-209-10.
2.
Reconnect battery ground cable. Refer to para 7-58.
END OF TASK
TA 08334 3
4-74
Back to Top
