TM 9-2320-209-20-3-1
1.
Put fuel filter (1) and fuel pump (2) in place. Aline holes of two brackets (3).
2.
Using 1/2-inch socket wrench,
screw on and tighten two screws with
washers ( 4).
3.
Using 7/16-inch wrench,
screw on and tighten tube adapter (5) to filter (1).
4.
Using 3/8-inch wrench,
screw on and tighten tube adapter (6) to pump (2).
5.
Screw on and tighten electrical connector (7) to fuel pump (2).
NOTE
Follow-on Maintenance Action Required:
1.
Reconnect battery ground cable. Refer to para 7-58.
2.
Close hood. Refer to TM 9-2320-209-10.
END OF TASK
TA 08334 1
4-101