TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

  TM-9-2320-209-20-3-1 - Page 235 of 830

TM 9-2320-209-20-3-1
c.
Replacement.
FRAME 1
1.
Put support bracket assembly (1) on intake manifold (2).
2.
Put wiring harness ground terminal (3) under capscrew and lockwasher (4)
at front of support bracket assembly (1).
3.
Using l/2-inch wrench,
screw in and tighten three capscrews and
lockwashers (4).
4.
Place ignition unit (5) on support bracket assembly (1) and hook up ignition
unit clamp assembly (6).
5.
Put ignition cable and conduit plug (7) in ignition unit (5) . Using 7/8-inch
wrench, screw on and tighten nut (8) .
6.
Screw wiring harness connector (9) on ignition unit (5) terminal.
GO TO FRAME 2
4-147


Back to Top