TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

  TM-9-2320-209-20-3-1 - Page 236 of 830

TM 9-2320-209-20-3-1
FRAME 2
CAUTION
Engine manifold flame heater fuel pump is negative
grounded.
“A” pin is positive and “B” pin is negative.
Do not switch positions of pins or there could be per-
manent damage to pump.
1.
Place fuel pump (1) on support bracket assembly (2). Hook fuel pump clamp
assembly (3) to support bracket assembly (2) .
2.
Screw wiring harness connector (4) on fuel pump terminal (5) .
3.
Using 3/8-inch wrench, screw in and tighten inverted nut and tube (6).
4.
Using 7/16-inch wrench, screw in and tighten inverted nut and tube (7).
GO TO FRAME 3
4-148


Back to Top