TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 245 of 830

TM 9-2320-209-20-3-1

Section VI. ACCELERATOR, THROTTLE, AND ENGINE STOP CONTROLS

4-28.

THROTTLE CONTROL AND LINKAGE REMOVAL, REPAIR, REPLACEMENT,

AND ADJUSTMENT.

TOOLS :

9/16-inch open end wrench (2)

Cross-tip screwdriver (Phillips type)

6-inch scale

SUPPLIES:

None

PERSONNEL: T

WO

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a .

Preliminary Procedure. Open hood and right side panel. Refer to

TM 9-2320-209-10.

b. Removal.

FRAME 1

1.

Using screwdriver, loosen screw (1) and slide connector (2) off throttle

control wire (3) .

GO TO FRAME 2

TA 04738 5

4-157