TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 254 of 830

TM 9-2320-209-20-3-1

4-29. ACCELERATOR CONTROLS AND LINKAGES REMOVAL, REPAIR,

REPLACEMENT, AND ADJUSTMENT.

TOOLS :

l/2-inch open end wrench

l/2-inch socket wrench

Cross-tip screwdriver (Phillips type)

Long nose pliers

Diagonal pliers

SUPPLIES : None

PERSONNEL : T

WO

EQUIPMENT CONDITION :

Truck parked, engine off, handbrake set.

a. Preliminary Procedure.

Open hood and left side panel. Refer to

TM 9-2320-209-10.

b. Removal.

1.

Take ends of throttle return spring (1) out of swivel assembly (2) and

throttle return clip (3).

2.

Using phillips screwdriver, loosen screw (4) and slide coupling (5) off hand

throttle control wire (6). Pull wire out of clip (7).

3.

Using pliers, take cotter pin (8) out of straight-headed pin (9). Pull out

straight-headed pin.

GO TO FRAME 2

4-166