TM 9-2320-209-20-3-1
FRAME 3
Soldier B
1. Slide connector (1) along control wire (2) until it is flush against
clip (3).
2.
Using screwdriver, tighten screw (4).
Soldier A
3. Push and release accelerator pedal (5) three or four times.
Soldier B
4. Check that clip (3) slides back and forth freely on control wire (2).
Soldier A
5. Pull out and push in THROTTLE control (6) three or four times.
Soldier B
6. Check that accelerator rod (7) moves back and forth freely.
NOTE
Follow-on Maintenance Action Required:
Close hood and right side panel. Refer to TM 9-2320-209-10.
END OF TASK
TA 04739 2
4-165