TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 261 of 830

TM 9-2320-209-20-3-1

FRAME 5

1.

Put hand throttle control wire (I) through clip (2). Slide coupling (3) on end of

throttle control wire and up to clip.

2.

Place coupling (3) 1/8 inch away from clip (2) and tighten screw (4) using phillips

screwdriver.

3.

Move control rod (5) forward and to rear several times to check operation of control

linkages.

Make sure linkages move freely.

NOTE

Follow-on Maintenance

Close hood and left side panel.

END OF TASK

Action Required:

Refer to TM 9-2320-209-10.

TA 047151

4-173