TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 258 of 830

TM 9-2320-209-20-3-1

FRAME 2

1.

Put end of connecting link (1) through hole in lever assembly (2) as shown. Put

cotter pin (3) through hole in end of connecting link.

Using pliers, spread cotter

pin.

2.

Place lever assembly (2) in bracket (4) as shown.

Put headless pin (5) through holes

in bracket and lever assembly.

3.

Put two cotter pins (6) through holes in headless pin (5). Using pliers spread cotter

pins .

4.

Put stud of ball joint (7) through hole in lever assembly (2) as shown. Using

1/2-inch wrenches, screw on and tighten locknut (8).

GO TO FRAME 3

TA 047148

4-170