TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 323 of 830

TM 9-2320-209-20-3-1

5-6. EXHAUST SYSTEM (VERTICAL STACK) REMOVAL AND REPLACEMENT

(TRUCKS WITH ENGINES LD 465-1, LD 465-lC, AND LDT 465-lC EXCEPT

TRUCKS M50A2 AND M50A3).

TOOLS :

7/16-inch open end wrench

1/2-inch open end wrench

7/16-inch socket wrench

1/2-inch socket wrench

Slip joint pliers

9/16-inch open end wrench

Flat-tip screwdriver (2) 9/16-inch socket wrench

SUPPLIES : None

PERSONNEL: One

EQUIPMENT CONDITION :

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Remove air cleaner. Refer to para 4-3.

b.

Removal.

1.

Using 7/16-inch wrenches,

unscrew and take out locknut (1) and bolt (2) .

2.

Using screwdriver and pliers, spread couplng (3) and slide coupling a few

inches up pipe (4) .

3.

Throw gasket (5) away.

GO TO FRAME 2

TA 04722 8

5-55