TM 9-2320-209-20-3-1
FRAME 3
1.
2.
3.
4.
GO
Using l/2-inch wrench,
unscrew two locknuts (1) and take off U–bolt and
bracket (2).
Upper stack pipe (3)
pipe (4) .
If needed,
loosen stack pipe.
NOTE
may be stuck to lower stack
use hammer and pinch bar to
Pull upper stack pipe (3) off lower stack pipe (4).
NOTE
Hold lower stack pipe (4) when taking off locknuts
(5) and U-bolt and bracket (6) .
Using 9/16-inch wrench,
unscrew two locknuts (5) and take off U–bolt and
bracket (6). Slide shield assembly (7) up and off lower stack pipe (4).
Take lower stack pipe (4) out by turning as necessary and lowering pipe
through cutout in fender.
TO FRAME 4
TA 04723 0
5-57