TM-9-2320-209-20-3-1
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4
MAY 1981
TM-9-2320-209-20-3-1 - Page 334 of 830
TM 9-2320-209-20-3-1
1.
Put loop clamp (1) on muffler (2) as shown. Put bolt (3) through loop clamp
and screw on locknut (4) finger tight.
2.
Set loop clamp (1) so larger intake opening (5) is directly below outlet (6)
as shown. Both must be in line with loop clamp.
3.
Using 9/16-inch wrenches, tighten locknut (4).
GO TO FRAME 4
TA 047239
Back to Top
