TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 341 of 830

TM 9-2320-209-20-3-1

FRAME 10

1.

Put gasket (1) against flange (2) of lower stack pipe (3), Spread coupling

(4) and put over flange and gasket.

2.

Move exhaust flex line (5) as needed to aline flange (6) with flange (2).

3.

Join lower stack pipe (3) and exhaust flex line (5) using coupling (4).

NOTE

Coupling (4) must hold both flanges (2 and 6). Make

sure gasket (1) stays in coupling.

4.

Put bolt (7) through coupling (4) and using 1/2-inch wrenches , screw on and

tighten locknut (8).

GO TO FRAME 11

TA 04724 6

5-73