TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 344 of 830

TM 9-2320 -209- 20-1-1

5-7. EXHAUST SYSTEM (CLEAN AIR) REMOVAL, AND REPLACEMENT.

TOOLS :

7/16-inch open end wrench

1/2-inch scocket wrench

l/2--inch open end wench

9/16-inch socket wrench

9/16-inch open end wrench

Slip joint pliers

7/16-inch socket wrench

flat--tip screwdriver

SUPPLIES :

None

PERSONNEL :

One

EQUIPMENT’ CONDITION :

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Remove air cleaner. Refer to para 4-3.

b .

Removal.

FRAME 1

1.

Using 1/2-inch wrench, unscrew and take off locknut (1) and bolt (2).

2.

Using screwdriver, spread coupling (3) and lift exhaust pipe (4) clear.

Throw away gasket (5) and take off coupling.

GO TO FRAME 2

TA 047213

5-76