TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 351 of 830

TM 9-2320-209-20-3-1

c.

Replacement.

FRAME 1

1.

Put exhaust pipe (1) through hole in fender (2) and position as shown.

2.

Put U-bolt (3) around exhaust pipe (1), through support block (4), and

support brace assembly (5).

3.

Put two flat washers (6) on U-bolt (3) and screw on two locknuts (7). Using

9/16-inch wrench, snug up locknuts but do not tighten at this time.

GO TO FRAME 2

TA 04722 0

5-83