TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 342 of 830

TM 9-2320- 209-20-3-1

FRAME 11

1.

Set top of lower stack pipe (1) to extend l-inch above U-bolt (2) as shown.

2.

Using l/2-inch wrench, tighten two locknuts (3).

3.

Loosen two locknuts (4) as needed, and put upper stack pipe (5) on lower

stack pipe (1) .

Make sure upper stack pipe is firmly seated.

NOTE

Install upper stack pipe (5) so outlet (6) is out and back.

The angle from truck centerline should be 45°.

4.

Using 1/2-inch wrench, tighten two locknuts (4) .

GO TO FRAME 12

7A 047247

5-74