TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 510 of 830

TM 9-2320-209-20-3-1

7-13. INSTRUMENT CLUSTER COMPONENTS (EXCEPT SPEEDOMETER AND

TACHOMETER) REMOVAL AND REPLACEMENT

NOTE

Procedure for removal and replacement for each of

the instruments on instrument cluster is the same.

TOOLS:

Flat-tip screwdriver

3/8-inch open end wrench

SUPPLIES:

None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Disconnect battery

(2) Remove instrument

b.

Removal.

ground cable. Refer to para 7-58.

cluster.

Refer to para 7-12.

FRAME 1

1.

Using 3/8-inch wrench, unscrew and take off two nuts (1) from two mounting

studs (2) .

2.

Take off two lockwashers (3) and bracket (4).

3.

Pull temperature gage (5) out from front of instrument cluster (6).

GO TO FRAME 2

7-74