TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 514 of 830

TM 9-2320-209-20-3-1

7-14.

LIGHT SWITCH REMOVAL AND REPLACEMENT.

TOOLS:

Spanner wrench

Cross-tip screwdriver (Phillips type)

Flat-tip screwdriver

SUPPLIES:

None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Disconnect battery ground cable. Refer to para 7-58.

b.

Removal.

FRAME 1

1.

2.

3.

4.

GO

Using flat-tip screwdriver, unscrew and take out three screws (1). Take off

three handles (2).

Using phillips screwdriver, unscrew and take out four screws (3).

Push light switch (4) into instrument panel (5).

Take out light switch (4) from back of instrument panel (5) and let it hang

below intrument panel.

TO FRAME 2

7-78