TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 523 of 830

TM 9-2320-209-20-3-1

c.

Replacement.

1.

Put circuit breaker (1) on firewall (2) as shown and line up two mounting holes,

2.

Put two screws (3) in mounting holes and tighten, using phillips screwdriver.

3.

Plug connectors (4 and 5) into circuit breaker (1) as shown.

NOTE

Trucks with auxiliary power outlets have an additional 15-

ampere circuit breaker. This circuit breaker is located

next to circuit breaker (1). Replacement procedures are

same for both breakers.

NOTE

Follow-on Maintenance Action Required:

1. Reconnect battery ground cable. Refer to para 7-58.

2.

Close hood and left side panel. Refer to

TM 9-2320-209-10.

END OF TASK

7-87