TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 524 of 830

TM 9-2320-209-20-3-1

Section V. LIGHTING SYSTEM

7-17.

FRONT SERVICE HEADLIGHT ASSEMBLY REMOVAL

TOOLS:

7/16-inch open end wrench

SUPPLIES:

Tags

PERSONNEL: One

AND REPLACEMENT.

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set, light switch

in OFF position.

a.

Preliminary Procedure. Open hood and side panel. Refer to

TM 9-2320-209-20-10.

b.

Removal.

NOTE

Tag plugs (1) so they will be put back in same place.

1.

Unplug three electrical plugs (1) from rear of headlight assembly (2).

2.

Using 7/16-inch wrench, unscrew and take off three nuts (3) from three shock

mount studs (4). Take off washers (5).

3.

Take out headlight assembly (2) from front of truck.

END OF TASK

7-88