TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 526 of 830

TM 9-2320-209-20-3-1

7-18. FRONT

TOOLS:

SUPPLIES:

SERVICE HEADLIGHT ASSEMBLY REPAIR.

Flat-tip screwdriver 7/16-inch box wrench

6-inch long nose pliers 3/8-inch drive extension, 12 inches

7/16-inch socket wrench

long

3/8-inch drive 3/8-inch drive ratchet

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

PERSONNEL:

One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set, light

switch in OFF position.

a.

Preliminary Procedures.

(1) Remove front service headlight

(2) Remove front service headlight

b.

Disassembly.

assembly. Refer to para 7-17.

sealed beam. Refer to para 7-20.

1.

Using long nose pliers, unhook spring (1) from ring assembly (2) and headlamp

housing (3).

2.

Pull ring assembly (2) out and away from two adjusting screws (4).

3.

Using screwdriver, unscrew and take out two adjusting screws (4).

GO TO FRAME 2

7-90