TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 531 of 830

TM 9-2320-209-20-3-1

7-19.

FRONT SERVICE HEADLIGHT ASSEMBLY ADJUSTMENT.

TOOLS:

Flat-tip screwdriver

50-foot tape measure

Carpenter’s square

SUPPLIES:

Chalk, SS-C-266F

String

PERSONNEL: Three

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

1.

Using tape measure and chalk, draw line (1) 25 feet from and parallel to

vertical wall (2).

2.

Start unloaded truck. Refer to TM 9-2320-209-10. Move truck so that head

lights (3) are parallel with and directly above line (1). The center line of

truck (4) will be at right angle (90°) to wall (2) as shown.

3.

Stop engine and set handbrake. Refer to TM 9-2320-209-10.

GO TO FRAME 2

7-95