TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 539 of 830

TM 9-2320-209-20-3-1

b.

Replacement.

1.

Plug in three plugs (1) as tagged. Take off tags.

2.

Put sealed beam (2) in ring assembly (3) and aline three tabs (4) with three

notches (5) on sealed beam.

NOTE

Make sure that drain hole in retaining assembly (retaining

ring and mounting ring) is placed at the bottom.

3.

Put retaining ring (6) on three screws (7). Push it in and turn it to right.

Using screwdriver, tighten three screws (7).

4.

Put mounting ring (8) over sealed beam (2), alining holes.

5.

Using screwdriver, screw in and tighten three screws (9).

END OF TASK

7-103