TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 540 of 830

TM 9-2320-209-20-3-1

7-21. BLACKOUT DRIVE LIGHT ASSEMBLY AND BRACKET REMOVAL AND RE-

PLACEMENT (TRUCKS WITH WINCH).

NOTE

The blackout drive light assembly is mounted below

the headlight assembly.

TOOLS:

7/16-inch wrench (2)

9/16-inch wrench

SUPPLIES:

None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set, light switch

in OFF position.

a .

Preliminary Procedure. Open hood and left side panel. Refer to

TM 9-2320-209-10.

b.

Removal.

FRAME 1

1.

Unplug electrical connector (1) from connector (2).

2.

Using 9/16-inch wrench, unscrew and take off nut (3), lockwasher (4), ground

wire (5), and mounting washer (6).

3.

Take out blackout drive light assembly (7) from mounting bracket (8).

GO TO FRAME 2

7-104