TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 549 of 830

TM 9-2320-209-20-3-1

7-23.

BLACKOUT DRIVE LIGHT SEALED BEAM UNIT REMOVAL AND REPLACEMENT.

TOOLS:

Flat-tip screwdriver

6-inch long-nose pliers

SUPPLIES:

None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set, light

switch in OFF position.

a.

Removal.

FRAME 1

I

1.

Using screwdriver,

unscrew and take out three screws (1).

2.

Hold light door (2) with sealed beam (3) away from light body (4).

3.

Unplug two electrical leads (5 and 6).

4.

Take out sealed beam (3) and light door (2).

GO TO FRAME 2

7-113