TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 555 of 830

TM 9-2320-209-20-3-1

7-25. TAILLIGHT AND STOPLIGHT ASSEMBLY (RIGHT SIDE ONLY) REMOVAL AND

REPLACEMENT (EARLY MODEL TRUCKS WITH TURN SIGNALS).

NOTE

The blackout stoplight is mounted on top of

bracket on some trucks and on bottom of

bracket on other trucks. This task is for

truck M756A2.

It can be used for other trucks.

TOOLS:

9/16-inch wrench

SUPPLIES:

Tags

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set, main light

switch in OFF position.

a.

Preliminary Procedure. Remove blackout stoplight assembly. Refer to

para 7-31.

b.

Removal.

FRAME 1

NOTE

Tag three electrical lead plugs (1) so they will be put

back the same way.

1.

Unplug three electrical lead plugs (1) from wiring harness connectors (2).

2.

Using 9/16-inch wrench,

unscrew and take off two capscrews and lockwashers

(3), clamp (4), and ground wire (5).

3.

Take off blackout stoplight bracket (6) and taillight and stoplight assembly (7)

END OF TASK

7-119