TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 557 of 830

TM 9-2320-209-20-3-1

7-26.

TAILLIGHT AND STOPLIGHT ASSEMBLY (RIGHT SIDE ONLY) REPAIR

(TRUCK M756A2).

TOOLS:

Flat-tip screwdriver

Cross-tip screwdriver (Phillips type)

SUPPLIES:

Mild soap

Electrical contact cleaner, MS 230

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set, main light

switch in OFF position.

a.

Preliminary Procedures.

(1) Remove taillight and stoplight assembly and blackout stoplight bracket.

Refer to para 7-25.

(2) Remove taillight and stoplight lamps. Refer to para 7-27.

b.

Disassembly.

FRAME 1

1.

Using flat-tip screwdriver, unscrew and take out two screws (1) with

lockwashers (2).

2.

Using phillips screwdriver, unscrew and take out three screws (3).

3.

Take out socket assembly with wiring (4) from light housing (5).

END OF TASK

7-121