TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 566 of 830

TM 9-2320-209-20-3-1

7-30. TAILLIGHT AND STOPLIGHT ASSEMBLY (LEFT SIDE ONLY) REPAIR.

TOOLS:

Flat-tip screwdriver

Cross-tip screwdriver (Phillips type)

SUPPLIES:

Mild soap

Contact cleaner, MS 230

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Remove left taillight

(2) Remove left taillight

b.

Disassembly.

and stoplight assembly. Refer to para 7–28.

and stoplight lamps. Refer to para 7–29.

NOTE

On some taillight and stoplight assemblies, you will have

to use a flat-tip screwdriver to take out screws (1 and 2).

1.

Using phillips screwdriver, unscrew and take out two screws (1) and

two washers (3).

2.

Using phillips screwdriver, unscrew and take out three screws (2).

3.

Take socket assembly with wiring (4) from light housing (5).

END OF TASK

7-130