TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 556 of 830

TM 9-2320-209-20-3-1

c.

Replacement.

1.

Aline two holes in light assembly (1) with holes in light bracket (2) and

holes in blackout stoplight bracket (3). Put ground wire (4) on capscrew

and lockwasher (5) and screw in capscrew.

2.

Put clamp (6) on wires (7) and aline clamp with hole. Using 9/16-inch

wrench, screw in and tighten capscrew and lockwasher (8) and tighten

capscrew(5).

3.

Plug three electrical lead plugs (9) into harness connectors (10).

4.

Take off tags.

Replace

END OF TASK

NOTE

Follow-on Maintenance Action Required:

blackout stoplight assembly. Refer to para 7-31.

7-120