TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 538 of 830

TM 9-2320-209-20-3-1

7-20.

FRONT SERVICE SEALED BEAM

TOOLS:

Flat-tip screwdriver

SUPPLIES:

Tags

PERSONNEL: One

REMOVAL AND REPLACEMENT.

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set, light switch

in OFF position.

a.

Removal.

FRAME 1

1.

Using screwdriver,

unscrew and take out three screws (1) from headlight

mounting ring (2). Take off mounting ring.

2.

Using screwdriver, loosen three screws (3) from

Hold sealed beam (5) in place and turn retaining

NOTE

Tag wires (6) so they will be put back

sealed beam retaining ring (4).

ring to left and take it off.

in same places.

3.

Pull out sealed beam (5) and unplug three plugs (7).

END OF TASK

7-102