TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 537 of 830

TM 9-2320-209-20-3-1

1.

2.

3.

4.

5.

6.

7.

8.

9.

NOTE

If working on early model trucks, do step 1.

Using flat-tip screwdriver, unscrew and take out three screws (1). Take off

rim (2).

Turn on headlights and high beams. Refer to TM 9-2320-209-10.

Cover right headlight.

Center of left headlight hot spot (3) should be where lines A-A and B-B meet

as shown.

Using flat-tip screwdriver, turn screw (4) to move hot spot (3) left or right to

put center as shown.

Using flat-tip screwdriver, turn screw (5) to move hot spot (3) up or down to

put center as shown.

Uncover right headlight.

Do steps 2 through 6 again for right headlight, covering left headlight and

using lines C-C and A-A.

Shut off high beams and headlights. Refer to TM 9-2320-209-10.

END OF TASK

7-101