TM 9-2320-209-20-3-1
d.
Assembly.
1.
Put grommet (1) in light housing (2). Using screwdriver, screw in and
tighten three screws (3).
2.
Put socket assembly with wiring (4) into light housing (2) and pull wires
through holes in grommet (1).
3.
Using screwdriver,
screw in and tighten two screws (5)
NOTE
Follow-on Maintenance Action Required:
1. Replace front marker lamps. Refer to para
and two washers (6).
7-35.
2. Replace front marker light assembly. Refer to
para 7-34.
END OF TASK
7-148