TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 587 of 830

TM 9-2320-209-20-3-1

7-38. FLOODLIGHT HOUSING REMOVAL, REPAIR, AND REPLACEMENT (TRUCK

M756A2).

TOOLS:

3/4-inch box wrench

9/16-inch box wrench

SUPPLIES:

Solvent, dry cleaning, type II (SD-2) , Fed. Spec P-D-680

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Remove floodlight sealed beam. Refer to para 7-39.

b.

Removal.

1.

Using 3/4-inch wrench,

hold capscrew (1) and using 9/16-inch wrench,

unscrew and take off nut (2), lockwasher (3), and washer (4).

2.

Take out capscrew (1) with two spring washers (5), two washers (6), and

washer (7).

3.

Take out spacer (8) and grommet (9).

4.

Do steps 1 through 3 again for other side of housing and take off floodlight

housing (10).

END OF TASK

7-151