TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 615 of 830

TM 9-2320-209-20-3-1

7-47.

SERVICE AND BLACKOUT CLEARANCE LAMPS REMOVAL AND REPLACEMENT.

NOTE

This task is the same for service and black-

out clearance lamps on all trucks.

TOOLS:

Cross-tip screwdriver (Phillips type)

SUPPLIES:

None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set, light

switch in OFF position.

a. Removal.

FRAME 1

1.

Using screwdriver,

unscrew and take out two screws (1).

2.

Take off light door (2) with lens (3).

3.

Push lamp (4) in and turn it 1/4 turn to left. Take out lamp.

END OF TASK

7-179