TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 626 of 830

TM 9-2320-209-20-3-1

Section VII. HORN ASSEMBLY

7-52. HORN BUTTON REMOVAL, REPAIR, AND REPLACEMENT.

TOOLS:

Flat-tip screwdriver

SUPPLIES:

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Safety wire, MS 20995-N51-18

PERSONNEL :

One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Open left side panel. Refer to TM 9-2320-209-10.

(2) Disconnect battery ground cable. Refer to para 7-58.

b. Removal.

1.

Lift rubber cap (1) off horn button (2). Press down on horn button and turn

to left one quarter turn.

2.

Lift off horn button (2) and take out contact (3), spring (4), and cap (5).

GO TO FRAME 2

7-190