TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 663 of 830

TM 9-2320-209-20-3-1

Section IX. CHASSIS HARNESS

7-59.

GENERATOR-TO-REGULATOR HARNESS REMOVAL, REPAIR, AND REPLACE-

MENT (TRUCKS WITH ENGINES LDS 427-2, LD 465-1, AND LDT 465-IC).

TOOLS:

Spanner wrench

Soldering iron

SUPPLIES:

Sandpaper or crocus cloth

Electric insulating tape, MIL-T-50886

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedure. Disconnect battery ground cable. Refer to para 7-58.

b.

Removal.

FRAME 1

NOTE

Note the way generator-to-regulator harness is routed

so that it can be put back the same way.

1. Using spanner wrench, unscrew and take off generator–to–regulator harness

connector (1) from regulator (2).

2.

Using spanner wrench,

unscrew and take off generator–to–regulator harness

connector (3) from generator (4).

3. Take out generator-to-regulator harness (5).

END OF TASK

7-227