TM 9-2320-209-20-3-1
(e) Tee fitting
NOTE
Tee fitting at secondary and final filter assem-
blies on truck with LD-465 engine is used for
this typical procedure.
1.
Open hood and left side panel. Refer to TM 9-2320-209-10.
2.
Using 5/8-inch combination box and open end wrench, unscrew and take off
tube nut ( 1).
Using 9/16-inch wrench,
unscrew and take off elbow (2) .
3.
Using 9/16-inch open end wrench, hold elbow ( 3). Using 11/16-inch com-
bination box and open end box wrench, unscrew and take off hose nut (4) .
Using 9/16-inch wrench,
unscrew and take off elbow (3) .
4.
Using 10-inch pipe wrench,
unscrew and take off tee fitting (5) .
END OF TASK
TA 08707 8
4-17